-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Wingnut Wing SE.5a
- Thread starter moon puppy
- Start date
That's exactly what I'm hitting. I test fitted the cowl and it just looks wonky.
I have the flat wire from RB productions. I didn't get the connectors they offered but I'm thinking about brass tube somehow. they didn't have turnbuckles like the other subjects did.
thanks for that Paddy, I got some photos of the same aircraft when I visited years ago.
I did some test fit on the nose and I can see how it can go sideways pretty quickly. You have to make sure the motor mates up with the engine bearers in the nose plumb and square then the radiator assembly squares things up even more. The way the fuselage halves bulge will cause issues if you just trust it, it should have had more positive bracing up there. I'm trying to see if I can install the radiator assembly first then slip the motor in. But when it was all dry fitted and squared up the engine cowl just dropped right in no problem.
And you konw all that goes out the window when you apply glue.
thanks for that Paddy, I got some photos of the same aircraft when I visited years ago.
I did some test fit on the nose and I can see how it can go sideways pretty quickly. You have to make sure the motor mates up with the engine bearers in the nose plumb and square then the radiator assembly squares things up even more. The way the fuselage halves bulge will cause issues if you just trust it, it should have had more positive bracing up there. I'm trying to see if I can install the radiator assembly first then slip the motor in. But when it was all dry fitted and squared up the engine cowl just dropped right in no problem.
And you konw all that goes out the window when you apply glue.
Brokeneagle
Master at Arms
Sounds like you're 'down and dirty' with it. Break it in baby! 
centaur567
Well-known member
Glad you got it figured out. Your right about the gluing. It's one of the rules of modeling. Gary S.
You can see here how this could go south with the cowling fit.
of course a little extra pressure while gluing the motor to the bearers will solve this to some extent.
A rough dry fit and you see it'll be ok. I'm not wiring or plumbing gas lines to the engine. It will not be seen.
I gotta work out my PC10 now, I'll need to paint several of the panels before I glue them in place
of course a little extra pressure while gluing the motor to the bearers will solve this to some extent.
A rough dry fit and you see it'll be ok. I'm not wiring or plumbing gas lines to the engine. It will not be seen.
I gotta work out my PC10 now, I'll need to paint several of the panels before I glue them in place
