-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Project : 1918230HPWnWDH91/32
- Thread starter paddy
- Start date
Double stringing that rigging line is a PITB ain't it? Maybe a spot of glue to get that pig tail to lay down. I've been trying to think of how to make it look like how they have the pig tail wrapped but coming up short.
centaur567
Well-known member
Masterpiece in the making!! Gary S.
Brokeneagle
Master at Arms
paddy
Well-known member
A problem i had with Italeri a while back was the plastic becoming ultra brittle when subject to Spirits based washes. I couldn't prove it either way in tests but i found the wing struts on this model seemed to lose the pin ends very easily after being painted with spirit based oils ?
The pin ends are 1mm which is handy as i was able to drill the end of the struts 0.5mm, incert a hard steel pin and then fix some 1mm alloy tube over the steel pin on abouty 50% or the struts
The pin ends are 1mm which is handy as i was able to drill the end of the struts 0.5mm, incert a hard steel pin and then fix some 1mm alloy tube over the steel pin on abouty 50% or the struts
Last edited:
