Heavens Eagle
Well-known member
Nah, this is the scale he needs.
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Wingnut Wing SE.5a
- Thread starter moon puppy
- Start date
I think I got that...or something close. 
Rigging and attachment points.
I had gotten the RAB Productions RAF Wire set years ago for the SE5 and after looking at the suggested instructions it appears you have to have the kit built up and measure what you need then cut. I'm not a measure twice, cut once type guy so I'm not going to try that. Besides the wings might be a bit wobbelly between measure and fit so nope.
On the Tripe I used this white flat elastic thread someone suggested and it worked out great to the best of my memory. It actually flattened out because the pivot of the attachment point sort of pulled it flat, I was careful to make sure I didn't twist so they still appear to be aerodynamic.
But the attachment points have been bothering me so I hit up Gaspatch.
Y'all see that I got several different styles for RAF types, the metal ones just kinda confuse me. It has a rod protruding from the nut, the instructions call for you to put a pipe over that rod with the rigging material strung trhough the pipe. This makes the rigging line offset of center of the attachment point. Will we notice? I don't know but I see it!
They have these nice 3d printed attachment points that have holes down the center. It really makes more sense.
You can actually attach the lines in the holes with these attachment points strung and then put them in place secured with CA.
I also played with pre threading them while still on the runner.
Yes, gotta drill out the hole a bit but that's not a biggy if you got a thin enough drill or even wire.
These are the ones I'm going with! Hope there's enough but we'll see.
I had gotten the RAB Productions RAF Wire set years ago for the SE5 and after looking at the suggested instructions it appears you have to have the kit built up and measure what you need then cut. I'm not a measure twice, cut once type guy so I'm not going to try that. Besides the wings might be a bit wobbelly between measure and fit so nope.
On the Tripe I used this white flat elastic thread someone suggested and it worked out great to the best of my memory. It actually flattened out because the pivot of the attachment point sort of pulled it flat, I was careful to make sure I didn't twist so they still appear to be aerodynamic.
But the attachment points have been bothering me so I hit up Gaspatch.
Y'all see that I got several different styles for RAF types, the metal ones just kinda confuse me. It has a rod protruding from the nut, the instructions call for you to put a pipe over that rod with the rigging material strung trhough the pipe. This makes the rigging line offset of center of the attachment point. Will we notice? I don't know but I see it!
They have these nice 3d printed attachment points that have holes down the center. It really makes more sense.
You can actually attach the lines in the holes with these attachment points strung and then put them in place secured with CA.
I also played with pre threading them while still on the runner.
Yes, gotta drill out the hole a bit but that's not a biggy if you got a thin enough drill or even wire.
These are the ones I'm going with! Hope there's enough but we'll see.
