Kreighshoer
Active member
Re: Quad with 6 pdr. gun by Bagge
great looking quad mats!
great looking quad mats!
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Quad & Bedford QL portee. Quad is done.
- Thread starter Bagge
- Start date
Bagge
Well-known member
Re: Quad with 6 pdr. gun by Bagge
Ok so here i go again.... couldn't stand the thought of giving up on it, i must give it a second try
Managed to break and tweak the pieces i glued so the doors fits better (but not good!)
Also added details to the front.
Now bedtime, tomorrow meeting at the modelclub! :woohoo:
//Mats
Ok so here i go again.... couldn't stand the thought of giving up on it, i must give it a second try
Managed to break and tweak the pieces i glued so the doors fits better (but not good!)
Also added details to the front.
Now bedtime, tomorrow meeting at the modelclub! :woohoo:
//Mats
Re: Quad with 6 pdr. gun by Bagge
Bagge
Well-known member
Re: Quad with 6 pdr. gun by Bagge
Update :woohoo:
Been doing some small progress on both the QL and the Quad.
Drilled out the tubes on the support frame and started on the rear plattform.
this chain was sanded down and the holes opened up for a real chain
The bed was realy not straight, so i had to clamp it down when gluing it to make it somewhat flat.
The winch.
The axles for the winch that was in the kit was 2 mm to short so new ones was made from evergreen rod,
And here is the Quad, i had to make new attachments for the mirrors after i managed to brake them both off earlier
drilled a hole in the body and glued a piece of steelwire in place and then the mirror ontop voila!
Thats it for today, tomorrow we go to a event with the modelclub, so from 10 to 18 we are showing people in halle what we do in the club
//Mats
Update :woohoo:
Been doing some small progress on both the QL and the Quad.
Drilled out the tubes on the support frame and started on the rear plattform.
this chain was sanded down and the holes opened up for a real chain
The bed was realy not straight, so i had to clamp it down when gluing it to make it somewhat flat.
The winch.
The axles for the winch that was in the kit was 2 mm to short so new ones was made from evergreen rod,
And here is the Quad, i had to make new attachments for the mirrors after i managed to brake them both off earlier
drilled a hole in the body and glued a piece of steelwire in place and then the mirror ontop voila!
Thats it for today, tomorrow we go to a event with the modelclub, so from 10 to 18 we are showing people in halle what we do in the club
//Mats
Ken Abrams
Well-known member
Re: Quad with 6 pdr. gun by Bagge
Lots of work going into this one Mats.
Lots of work going into this one Mats.
panzerace007
Active member
Re: Quad with 6 pdr. gun by Bagge
Kick It Matts !! Smokin' Job !!
Kick It Matts !! Smokin' Job !!
Bagge
Well-known member
Re: Quad with 6 pdr. gun by Bagge
Manage to find the way back to this topic again
Tonight i've been busy making the driver of the Bedford QL, I used the british jeep crew from miniart, and the driver fits "almost" perfect :S
Here he is all glued up!
Test drive
started painting, the recomendations on the box is a little strange i think but maybe correct i don't know, i will follow it and then comes the dust to smooth out the colours
//Mats
Manage to find the way back to this topic again
Tonight i've been busy making the driver of the Bedford QL, I used the british jeep crew from miniart, and the driver fits "almost" perfect :S
Here he is all glued up!
Test drive
started painting, the recomendations on the box is a little strange i think but maybe correct i don't know, i will follow it and then comes the dust to smooth out the colours
//Mats
