Heavens Eagle
Well-known member
Looking good Paddy!
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Italeri Fiat 806 GP racer 1:12
- Thread starter paddy
- Start date
paddy
Well-known member
So this is my end of year round up on this
I was searching on line for ideas about wheels for this and as luck would have it i found several people doing rims and hubs for the Airfix Bentley 1/12 that were listed as suitable for the Fiat 806 and the fiat Mephistopheles which was a result so i contacted the guys in Ireland who did the 3d printed wheels for my Bentley build years ago and they are sending a set for the fiat
I have found the way to build these kits is ton use the screws to hold it all together than remove the screws one by one and replace with a super glued MFH alloy hex head and stem. What they call a hex head rivet. even now screws left tightened over night maybe loose and in a cracked fitting over night. I have solved this to an extent..... the screws supplied at mostly countersunk but the holes aren't so as you tighten the screw its acting like a wedge in a log and splitting the plastic so i have bought some 1.4mm flat head screws , not countersunk and that has greatly improved things.
Happy new your to everyone here
I was searching on line for ideas about wheels for this and as luck would have it i found several people doing rims and hubs for the Airfix Bentley 1/12 that were listed as suitable for the Fiat 806 and the fiat Mephistopheles which was a result so i contacted the guys in Ireland who did the 3d printed wheels for my Bentley build years ago and they are sending a set for the fiat
I have found the way to build these kits is ton use the screws to hold it all together than remove the screws one by one and replace with a super glued MFH alloy hex head and stem. What they call a hex head rivet. even now screws left tightened over night maybe loose and in a cracked fitting over night. I have solved this to an extent..... the screws supplied at mostly countersunk but the holes aren't so as you tighten the screw its acting like a wedge in a log and splitting the plastic so i have bought some 1.4mm flat head screws , not countersunk and that has greatly improved things.
Happy new your to everyone here
I'm a fan of Loctite on screws but I really don't know if it will work in our world. I don't think a touch of CA would help, too brittle. Sounds like you got the fix though.
Heavens Eagle
Well-known member
If they were machine screws I would have probably bought taps and pre-threaded the holes. I guess these are like mini sheet metal screws though. It probably could be possible to make some kind of tap for these as well but what a pain in the can.
paddy
Well-known member
You can guess the price of a good quality 1.4mm tap probably more than the kit .....
I have some std quality and they act like reamers giving a perfectly smooth hole as as the cut and strip their own threads :
As i say the real problem is actually the kit is designed to be metal and the plastic parts just dont have the strength or wall thickness for threads.
probably more than the kit .....I have some std quality and they act like reamers giving a perfectly smooth hole as as the cut and strip their own threads :
As i say the real problem is actually the kit is designed to be metal and the plastic parts just dont have the strength or wall thickness for threads.
paddy
Well-known member
I have made up a mount for the magnetos and put the left side plug leads on and connected the magnetos to the camshaft drives.
Its actually been the most difficult part of the build so far scratching the leads and bracket and the reworking of the magnetos themselves. Only problem that needs addressing before i do the right side is the bright colour of the leads themselves.
I got the other side done last night, i struggle working with 2 pairs of tweezers, for some reason as soon as i hold tweezers my hands shake
Thanks guys, you are too kind
I got the other side done last night, i struggle working with 2 pairs of tweezers, for some reason as soon as i hold tweezers my hands shake
The reason i am messing about with bits that will not be seen is i have decided to build this as a cutaway. Originally i was going to just leave the body off and display it separately but that just takes up twice the shelf space. so now i am thinking i will cut the body right down the centre line.
It throws up its own problems like the instrument panel is mounted on the half i want to cut off.....lol
Its actually been the most difficult part of the build so far scratching the leads and bracket and the reworking of the magnetos themselves. Only problem that needs addressing before i do the right side is the bright colour of the leads themselves.
I got the other side done last night, i struggle working with 2 pairs of tweezers, for some reason as soon as i hold tweezers my hands shake
Thanks guys, you are too kind
I got the other side done last night, i struggle working with 2 pairs of tweezers, for some reason as soon as i hold tweezers my hands shake
The reason i am messing about with bits that will not be seen is i have decided to build this as a cutaway. Originally i was going to just leave the body off and display it separately but that just takes up twice the shelf space. so now i am thinking i will cut the body right down the centre line.
It throws up its own problems like the instrument panel is mounted on the half i want to cut off.....lol
paddy
Well-known member
I hope this will work.....there is no turning back now .............................(without a lot of glue )
The project will need a frame . I dont know if it had one in real life, no one does but its going to get one now as i need some sort of base to build on from now on. I got some U section brass from the model shop, a bit of a gamble as i didnt know if it would bend, some brass is very crisp and snaps but i got away with it quite well
somehow i have to fix it the chassis and the half body now
I think its called winging it
.............................(without a lot of glue )The project will need a frame . I dont know if it had one in real life, no one does but its going to get one now as i need some sort of base to build on from now on. I got some U section brass from the model shop, a bit of a gamble as i didnt know if it would bend, some brass is very crisp and snaps but i got away with it quite well
somehow i have to fix it the chassis and the half body now
I think its called winging it
Did you anneal the brass at all or just go for the bend? However you did it you nailed it!
