Kreighshoer
Active member
strange kit! strange engineering! progress doesn't look like much but the equilibrator pistons (or what those two thingies are called) gave me some headache to mount.
on the one hand trumpeter instructions suggest the howitzer to be built in towed position and don't give any alternative but on the other hand the recoil system rod is only a short length of about 5mm, so the barrel should be mounted in firing position - unacceptable! anybody remember mr paperclip from ms office? i found better usage for him! the recoil cylinder looks askew in the pics but it's aligned correctly in RL (if not - i will return and check again - it will be corrected!)
Agonoize - Koprolalie
on the one hand trumpeter instructions suggest the howitzer to be built in towed position and don't give any alternative but on the other hand the recoil system rod is only a short length of about 5mm, so the barrel should be mounted in firing position - unacceptable! anybody remember mr paperclip from ms office? i found better usage for him! the recoil cylinder looks askew in the pics but it's aligned correctly in RL (if not - i will return and check again - it will be corrected!)
Agonoize - Koprolalie
