-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
M3 Lee Lulubelle
- Thread starter moon puppy
- Start date
Wheels up!
Well ok, road wheels done. Took care to make sure all the castle nuts pointed outward and alignments were good. I drilled out 1.3mm hole through the pivot axel of the swing arm but I used 1.0 mm pipe to secure it. That gave me wiggle room for alignment of the wheels on the tracks.
Well ok, road wheels done. Took care to make sure all the castle nuts pointed outward and alignments were good. I drilled out 1.3mm hole through the pivot axel of the swing arm but I used 1.0 mm pipe to secure it. That gave me wiggle room for alignment of the wheels on the tracks.
Didn't even think about it, think i'll flow some liquid puddy up there and then camouflage it with sand.
Used to be able to do the SHAG...
Oh Behave...the Myrtle Beach type shaggin'.
Oh Behave...the Myrtle Beach type shaggin'.
centaur567
Well-known member
Mabey you'll get it done this time. Rock on!! Gary S.
Thanks Gary, we're gonna do this!
Rhino
Super Moderator
Still soldiering on
Seats in the turret baskets... Note their construction won't allow them to fold down:
Much more whiter than I expected.
Rhino
Super Moderator
Racist.
Brokeneagle
Master at Arms
This post is getting weirder all the time! 
We're getting back on track Ian...tracks....get it...
Top Turret is nearly done and I should have the CO copula this week. I've already got a coat of OD on her.
Top Turret is nearly done and I should have the CO copula this week. I've already got a coat of OD on her.
First layer of OD, the turret is almost finished, just working on some plumbing and paint.
