• Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
    This requires that you manually reset your password.
    Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.

T-34 in Prague

Added some more grass, this one is greener and a little longer, need to cut it down some when dry (must find that lawn mower in 1/35 first...)
Used thinned wood glue on this application so it would blend in with the other grass, now just wait till the glue is dry so i can see the result :hmmm :popcorn

P1140892.JPG


P1140893.JPG


//Mats
 
Grass is dry, and after i used the hairtrimmer to cut it down a little :)
Still need some wash and paint though :hmmm

And i started working on the sidewalk, after some different ideas i choosed styren, i scribed the pattern in a 2mm evergreen plate and glued on a 2x2mm strip as edge against the grass.
Sanded all the surfaces and cut away small chips in the stones with a knife, then went over with a scotch-brite sanding cloth to smooth it out :)

Here is the pics :coolio

P1140895.JPG


P1140900.JPG


P1140901.JPG


P1140902.JPG


Sidewalk primed

P1140903.JPG


P1140904.JPG


P1140905.JPG


P1140906.JPG


P1140907.JPG


Now just find some good way to paint it :bang head
Will paint it and then fill the grooves with some pigments or fine spackel/plaster.
 
Almost there!! :woohoo: :dance

Just need a clearcoat on the balsastrips around the edge and i call it done!

P1140980.JPG


P1140981.JPG


P1140982.JPG


P1140983.JPG


One thing i will look for is a modern civilian figure for placing on the sidewalk, but that's another story.....
thanks for following along :drinks
//Mats
 
Be sure to paint the insides of the exhausts.

As for a figure, maybe the one on the right?

63000.jpg

Preiser 63000

Regards,
 
I call it done! :v

P1140985.JPG


P1140986.JPG


Had some chellack that after a couple of layers had the same tone as the frame, i'm happy :)

//Mats
 
Thanks guys :)
yes Ron, i thought about that to, will see if i find something suitable for leaves.
//Mats
 
Back
Top