Ditto what the others said. Hope life it getting back in harmony again. Really nice update, those engine plates look like they are hinged, they work?
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Petes Sturmi
- Thread starter Peter Bibby
- Start date
Matt Beattie
Member
Good to see this one up and running again Pete , so it will be ready by this Sunday then , nah just kidding
Good to hear all is back to normal again
cheer's
Matt
Good to hear all is back to normal again
cheer's
Matt
Peter Bibby
Member
Evening all.
Have found a bit more bench time so some more updates.
I have finished the engine deck, adding some bits from Eduard.
The gun/launcher was next on the list. Nice detail but I dont think it will be seen.
Still grasping for display ideas at the moment.
More soon.
Pete
Have found a bit more bench time so some more updates.
I have finished the engine deck, adding some bits from Eduard.
The gun/launcher was next on the list. Nice detail but I dont think it will be seen.
Still grasping for display ideas at the moment.
More soon.
Pete
Peter Bibby
Member
The main breech has been installed, along with the MG. The 3 piece front panel gives a nice scale thickness.
Next is the roof panel. Not the best fitting kit part in the world, but ok with some sanding.
The start of the rifling.
And after some gentle persuasion.
Inserted down the barrel
One complete Sturmtiger barrel
Back soon.......I hope
Pete
Next is the roof panel. Not the best fitting kit part in the world, but ok with some sanding.
The start of the rifling.
And after some gentle persuasion.
Inserted down the barrel
One complete Sturmtiger barrel
Back soon.......I hope
Pete
Kreighshoer
Active member
sweet stuff peter! the barrel rifling looks splendid!
Peter Bibby
Member
Thanks Laura,Eric and Mike.
The etch for the barrel was an interesting experiance, to say the least. I had it nice and round at one point, but it didnt come close to matching up. It took quite a few goes at getting the ends to meet. I will try to get the last couple of bits to sit flush in the barrel.
I have been plodding along with build, doing bits here and there. I finished both sides, deciding not to replace the hangers with the etch parts, but thining down the kit parts. I thought the etch might have ben a bit to thin.
I also added some small chain to the ports.
The etch for the barrel was an interesting experiance, to say the least. I had it nice and round at one point, but it didnt come close to matching up. It took quite a few goes at getting the ends to meet. I will try to get the last couple of bits to sit flush in the barrel.
I have been plodding along with build, doing bits here and there. I finished both sides, deciding not to replace the hangers with the etch parts, but thining down the kit parts. I thought the etch might have ben a bit to thin.
I also added some small chain to the ports.
Peter Bibby
Member
Next up are the details on the roof. I replaced some of the small details with etch, but there isnt much up here....
The hatch is just sitting at the moment until I decide on the setting.
The rear panel is done except for the crane. The rear hatch will be positioned open or closed as per the top hatch.
Time for the easter bunny now.
Have a happy one.
Pete
The hatch is just sitting at the moment until I decide on the setting.
The rear panel is done except for the crane. The rear hatch will be positioned open or closed as per the top hatch.
Time for the easter bunny now.
Have a happy one.
Pete
Ruben Lopez
Active member
It's really looking the part Pete; nice job all around!
Ruben
Ruben
Peter Bibby
Member
Thanks gents.
Slowly getting the big girl finished.
Knocked together the loading crane
Added the front gaurds and headlight
Working on the last few bits now so hopefully should see some paint soon. :cheer:
Some last shots with the top sitting on.
Cheers all
Pete
Slowly getting the big girl finished.
Knocked together the loading crane
Added the front gaurds and headlight
Working on the last few bits now so hopefully should see some paint soon. :cheer:
Some last shots with the top sitting on.
Cheers all
Pete
Peter Bibby
Member
Thanks Mike.
Well, lets get the construction done.....
Decided to use the "Hi-tech"
tracks from AFV. So close to going in the bin a couple of times.
It might have been me, but they are BLOODY AWFUL...
Pete
Well, lets get the construction done.....
Decided to use the "Hi-tech"
tracks from AFV. So close to going in the bin a couple of times.
It might have been me, but they are BLOODY AWFUL...
Pete
Peter Bibby
Member
So now that the track nightmare is out of the way, the side gaurds are installed with very carefully applied lakes of superglue.
That should now complete the buildy part. Some naked shots
Time for her to go to the spray room (or garage if you like).
Pete
That should now complete the buildy part. Some naked shots
Time for her to go to the spray room (or garage if you like).
Pete
.Peter Bibby
Member
Johnny, Mike, Gary, thanks.
Sorry for the lack of nakedness Gary
Anyway, got some primer on the big girl
Then after a bit of a pre shade, gave her a squirt of colour (although, looking at the photos..... not a lot.)
Now to decide on the next colour.
Back soon
Pete
Sorry for the lack of nakedness Gary
Anyway, got some primer on the big girl
Then after a bit of a pre shade, gave her a squirt of colour (although, looking at the photos..... not a lot.)
Now to decide on the next colour.
Back soon
Pete
TREEMENDUS
Member
Pete
Looks good already
Ant
Looks good already
Ant
