leFH18/40/2 (st) G.W. Pz.Kpfw. III/IV WIP

[panamadan]

What I find amazing is that idea was studied so late in the war. :blog
Dan

 

[Tony lee]

Dan since raw material was running low I think a multi purpose tank would solve some of the problems.

Saul all the jib mounts inside and out are there. Comparing the kit to a walk around DML didn't miss much at all.

Few more bits added today. With just about everything propped up in place it looks a little lopsided but you get the idea.

The kit did come with a few PE parts.

Very fine kit i'm tellin ya folks
Tony lee

 

[jknaus]

This is looking cooler and cooler. Against my better judgement I think I may hafta get me one. You're an evil man Tony Lee :evil:

James

 

[Sharkmouth]

Against my better judgement I think I may hafta get me one. You're an evil man Tony Lee

Believe me James, you are not the only one with these sentiments!



Regards,

 

[Iron Mike]

Resistance is futile.

Excellent work, Tony!

 

[Tony lee]

Let your conscious be your guide if it's stronger than mine. hmy:

Tiger Models has these but with the bad press they've been getting lately I just don't know.

Tony lee
PS: Saul those are some great photos, Thanks for posting them.

 

[Sharkmouth]

Tiger Models has these but with the bad press they've been getting lately I just don't know.

Jeff does seem overwhelmed. Only order if you speak to him directly. Or go to a show he is attending. In any case, you can see there are four posts. I see you accounted for two of the jib boom posts. As I mentioned, Panzer Tracts shows two rods side by side on a mount that has them fit through the triangular openings of the trail leg mounts. However, these rods are omitted from the other views.

Regards,

 

[Gator]

More great looking work Tony.

 

[Tony lee]

I try Gator I try,Thanks

I'll see what I can come up with tomorrow Saul but only one will fit in that spot you mentioned.
There may be room between the trailing arm support rails and the rear plate there on top.

Tony :idonno

 

[Kreighshoer]

ace work tony!

 

[Tony lee]

Thank You Laura. You're doing a pretty good job yourself.

Making the other two jib legs right now.

Tony lee

 

[Tony lee]

I'll Get By With a Little Help From My Friends

Not what you would call great scratch building but I think it'll serve the purpose.

Special Thanks goes out to Saul :v
Tony lee

 

[MrT]

Well it looks good to me!

 

[jknaus]

Nice
James

 

[moon puppy]

I'd be proud of that work Tony, what's the problem Bub?

 

[Iron Mike]

That looks spot on to me!!

 

[Tony lee]

Oh fellows it's no big deal. With the trailing arms mounted you're not going to see much of them anyway.
I just couldn't get a good square cut on that darn tubing for the collars.

I'll live to fight another day
Tony lee

 

[jknaus]

Tony if you have the JLC saw UMM makes this http://umm-usa.com/onlinestore/product_info.php?products_id=3661

Might help for next project.
James

 

[Tony lee]

That should do the trick James. Mine is a X-Acto box that's as old and worn out as I am.

Thank you sir
Tony lee

 

[jknaus]

Hope it works out for you Tony. I've been trying to order one for about 2 months. Last night was my lucky night. And its not old and worn out Tony. It's Experienced
James