-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
KI-27 Nate
- Thread starter phantom II
- Start date
phantom II
Master at Arms
Thanks Warren, Dave, Bob for tagging along 
Cheers, Christian B)
Cheers, Christian B)
phantom II
Master at Arms
Thanks Mark, Ausf, Mike . Would be nice if the internet would accept Mc Bucks
Cheers, Christian B)
Cheers, Christian B)
phantom II
Master at Arms
What with Windows 10 troubles and what not I got behind and let you slip a great build in on Me ... Looking very good Christian ...
Hmmmm you got behind even though Time Warner broke my internet for 24 Hrs :hmmm Must have been all that :fencing .
Speaking of Windows 10 , My computer won't even accept it until I get some sort of upgrade :idonno
Cheers, Christian B)
Talk to your IT guy before doing anything. :coolio
phantom II
Master at Arms
Rodger No in a big hurry B)
phantom II
Master at Arms
Looked at the Nate this morning and found some extra texture in the wing paint, so I buffed it out and sprayed a second coat of Future.
It looks ready for decals now.
Will apply them tomorrow. Cheer, Christian
It looks ready for decals now.
Will apply them tomorrow. Cheer, Christian
Neat Nate....thought of that this afternoon.
phantom II
Master at Arms
phantom II
Master at Arms
The bandages finally come off so I get to see the patient
Now that the identification panels and the home defense markings are on , it gets a dusting and another coat of Future to prepare it for decals
Cheers, Christian B)
Now that the identification panels and the home defense markings are on , it gets a dusting and another coat of Future to prepare it for decals
Cheers, Christian B)
A dusting?
:drinks
Swordsman
Active member
What with Windows 10 troubles and what not I got behind and let you slip a great build in on Me ... Looking very good Christian ...
Hmmmm you got behind even though Time Warner broke my internet for 24 Hrs :hmmm Must have been all that :fencing .
Speaking of Windows 10 , My computer won't even accept it until I get some sort of upgrade :idonno
Cheers, Christian B)
24 Hours is nothing compared to a week of 24's ... Seems my Motherboard needs to have a Bios Update ... and when I go to the Gigabyte web-sight my Anti-virus thinks it is a virus ... So still can't read Display but operating ... Before that I had Verizon troubles so I feel your pain ... Nate is looking mighty fine ... waiting to see the decals on it ... great looking Bird ... :salute
phantom II
Master at Arms
A dusting?
Tack rag would have worked but I rinsed it off .
When masking tape is pulled, paint flakes are created and sometimes stick to your build.
Cheers, Christian B)
phantom II
Master at Arms
A dusting?
A tack rag would have worked but I rinsed it off instead .
When pulling tape paint particles sometimes stick to your work.
Cheers, Christian B)
phantom II
Master at Arms
Thanks Bob, Mike , Luiz and Swordsman .
Curring now . Will try the lipstick and other makeup tomorrow
Cheers, Christian B)
After two different sessions , I'm still installing decals :snoopy
Good decals (life like decals ) One did not quite fit and another is not mentioned in the instructions .
Will try and figure it out tomorrow
Cheers, Chritian B)
Curring now . Will try the lipstick and other makeup tomorrow
Cheers, Christian B)
After two different sessions , I'm still installing decals :snoopy
Good decals (life like decals ) One did not quite fit and another is not mentioned in the instructions .
Will try and figure it out tomorrow
Cheers, Chritian B)
phantom II
Master at Arms
I want to say that this is a very nice set of decals. They go on every bit as good as the Microset decals use to .
However since the above picture I have run into some problems .
Even though the drawings indicate that the entire cowl is supposed to be red, there is nothing in the set to make that happen ! ! ! No instructions concerning the problem either :smack
I have tried to use some spare pieces to fix it but to no avail.
My second attempt was to paint the complete cowl with some mixed Tamiya red . . . Another fail
My next idea was to mix some Vallejo paints but first, one of their primers .
and that appears to be a lot closer to the original . Hopefully even better after a coat of Future .
No idea why but I seem to have issues with the Tamiya red :idonno This is not the first time that it would just not do .
Cheers, Christian B)
However since the above picture I have run into some problems .
Even though the drawings indicate that the entire cowl is supposed to be red, there is nothing in the set to make that happen ! ! !
No instructions concerning the problem either :smack I have tried to use some spare pieces to fix it but to no avail.
My second attempt was to paint the complete cowl with some mixed Tamiya red . . . Another fail
My next idea was to mix some Vallejo paints but first, one of their primers .
and that appears to be a lot closer to the original . Hopefully even better after a coat of Future .
No idea why but I seem to have issues with the Tamiya red :idonno This is not the first time that it would just not do .
Cheers, Christian B)
