-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Dora 1/35
- Thread starter fledermaus
- Start date
fledermaus
Master at Arms
Mike, Terry and James thanks guys! 
fledermaus
Master at Arms
Thanks Piet! 
Brokeneagle
Master at Arms
Good to see you back at this one - beautiful work!
fledermaus
Master at Arms
Impisi thanks, yes its a giant monster
fledermaus
Master at Arms
Ian thanks my friend 
, Im trying to work on it as much as I can, but time is very limited at this moments 
, Im trying to work on it as much as I can, but time is very limited at this moments
fledermaus
Master at Arms
Hi, here with an update on the Dora base, the camo posts are assembled, painted and glued in place, the top of the wall received some static grass and the bottom some foliage.
the posts received some paint
the diagonal tubes are glued to each post, I made the diagonal piece this short because of space limitations just to representate it. the real ones goes all the way to the ground.
next the ladders are constructed using evergreen 2.0mm rods, the ladders where used near the entrance
to the shelter.
foliage was added to the base of the wall as seen in photos of the real gun
the ladders are glued in place
next the camo posts are glued in place and it looks like this now.
this is what Im using as inspiration to make the base
Im currently working on making the nets and adding the camo to the base, plus some more static grass to finish the base and start working on the figures.
as always thanks for stopping by...
Abdin
the posts received some paint
the diagonal tubes are glued to each post, I made the diagonal piece this short because of space limitations just to representate it. the real ones goes all the way to the ground.
next the ladders are constructed using evergreen 2.0mm rods, the ladders where used near the entrance
to the shelter.
foliage was added to the base of the wall as seen in photos of the real gun
the ladders are glued in place
next the camo posts are glued in place and it looks like this now.
this is what Im using as inspiration to make the base
Im currently working on making the nets and adding the camo to the base, plus some more static grass to finish the base and start working on the figures.
as always thanks for stopping by...
Abdin
Last edited:
'Bout time!
Regards,
Regards,
Wow Abdin! I couldn't make out the poles at first but I see it now. very interesting. 
Duke Maddog
Well-known member
Stunning work man! I think you are the first to display this massive gun with camo nets and bunker. Most impressive!
fledermaus
Master at Arms
Thanks guys
,
Duke when I started planning the base wanted to make it interesting and something that no one
Has done to display the gun
.
,Duke when I started planning the base wanted to make it interesting and something that no one
Has done to display the gun
.
Duke Maddog
Well-known member
Thanks guys
Duke when I started planning the base wanted to make it interesting and something that no one
Has done to display the gun
And you've succeeded in spades my friend! Brilliant! If I had room, I'd probably try to replicate that base in 1/72 scale for my Dora. I don't have the space to even display her so my Dora sits inside her wooden box.
fledermaus
Master at Arms
Hi!
Back again with an update on the Dora base, the laminating of the back and sides has being completed. I left a small border around the base for an acrylic cover to be installed, the cammo net is made using moss glued with spray glue to the net and then painted a darker green.
the back of the base is finished with the formica laminate
the net is about 76 inches long
the net raedy to instal
because of space limitations the diagonal tubes for the nets had to be cut so the net doesnt hang outside the perimeter of the base, the net is attached to this diagonal tubes in the real gun but here I cant make it like that because I would need a bigger base than it already is.
the net is installed trimmed and painted dark green
here the moss has being painted
with the base work done I started to sassemble the gun to check everything fits ok.
now working on the figures and some finishing touches on the gun.
thanks to all!
Abdin
Back again with an update on the Dora base, the laminating of the back and sides has being completed. I left a small border around the base for an acrylic cover to be installed, the cammo net is made using moss glued with spray glue to the net and then painted a darker green.
the back of the base is finished with the formica laminate
the net is about 76 inches long
the net raedy to instal
because of space limitations the diagonal tubes for the nets had to be cut so the net doesnt hang outside the perimeter of the base, the net is attached to this diagonal tubes in the real gun but here I cant make it like that because I would need a bigger base than it already is.
the net is installed trimmed and painted dark green
here the moss has being painted
with the base work done I started to sassemble the gun to check everything fits ok.
now working on the figures and some finishing touches on the gun.
thanks to all!
Abdin
Thanks for sharing Abdin! Very well done! 
Duke Maddog
Well-known member
Man this is so awesome to see! If I only had the space to make a similar display for my Dora! Because I don't, she has to stay sleeping in her "baby coffin" as my friend calls it!
bigrin:
bigrin:
Brokeneagle
Master at Arms
This is going to be epic on the base with everything attached - love the cammo netting.