Ha, I know Phil will get a kick out of that. 
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Warren's Shelf Queen II
- Thread starter sharkman
- Start date
phantom II
Master at Arms
The dolly is looking good
Cheers, Christian B)
Cheers, Christian B)
Thanks guys!
A quick update today, then I have to go put up some Christmas lights!
After my first round of decals, most are on now but I ran out of time! I decided not to model an actual plane from a photo or anything but to go with a "could have been" number (56).
The decals were a mix of Techmod, Aeroscale, Tamiya, etc... but they worked very well with some Micro set and sol!
Did a little more to the beaching trolley. I'm going to add some wooden planks on the outsides (just made from sheet styrene)...
and drill a few holes I saw in a reference photo
A quick update today, then I have to go put up some Christmas lights!
After my first round of decals, most are on now but I ran out of time! I decided not to model an actual plane from a photo or anything but to go with a "could have been" number (56).
The decals were a mix of Techmod, Aeroscale, Tamiya, etc... but they worked very well with some Micro set and sol!
Did a little more to the beaching trolley. I'm going to add some wooden planks on the outsides (just made from sheet styrene)...
and drill a few holes I saw in a reference photo
phantom II
Master at Arms
Looking pretty sharp Warren 
Cheers, Christian B)
Cheers, Christian B)
Thanks Christian and Dave!
A little more progress on the Jake,
Got all the decals on. Had to make the red and white trolley markers for the floats by cutting down a couple Hinomarus for the red, then cutting some rectangular white bits for the centres.
Then I finished widening the holes I drilled in the sides of the trolley and cut some little pieces off round stock styrene for some bolt heads, saw one of you guys do this but I forget who, (probably chuk or Terry).
It dresses it up a little more...
A little more progress on the Jake,
Got all the decals on. Had to make the red and white trolley markers for the floats by cutting down a couple Hinomarus for the red, then cutting some rectangular white bits for the centres.
Then I finished widening the holes I drilled in the sides of the trolley and cut some little pieces off round stock styrene for some bolt heads, saw one of you guys do this but I forget who, (probably chuk or Terry).
It dresses it up a little more...
Nice details Warren, Looking good. 
phantom II
Master at Arms
I like it 
and the dolly is really cool too
Cheers, Christian B)
and the dolly is really cool too Cheers, Christian B)
Thanks guys!
This one has been sitting on the sidelines for the last little bit. Almost time to call it finished...
I put the last of the pieces on tonight.
Pitot tube (used the kits because I didn't have any needles small enough)
The exhausts
The wheels are now on the trolley as well as these little pieces I saw in a reference photo
Trolley is done! Just needs paint!
So, after I paint the trolley and weather it a bit it should be finished by the next update!
This one has been sitting on the sidelines for the last little bit. Almost time to call it finished...
I put the last of the pieces on tonight.
Pitot tube (used the kits because I didn't have any needles small enough)
The exhausts
The wheels are now on the trolley as well as these little pieces I saw in a reference photo
Trolley is done! Just needs paint!
So, after I paint the trolley and weather it a bit it should be finished by the next update!
phantom II
Master at Arms
Probably a step to get up onto the float Warren Cheers, Christian B)
Very cool, that's some major pipes on that thing. Looks great Warren.
Cheers, Christian B)
Looking at it again I suspect you're right Chris!
Very cool, that's some major pipes on that thing. Looks great Warren.
Thanks Bob! they are huge! Not sure of the need of the opening towards the front of the exhaust, maybe part of a turbo charger??
All Done!
I learned the hard way that bare metal foil is terrible if you mask a canopy and then leave it for a couple years!! Also noticed that I forgot to paint the instrument panel cowl black..... :angry:
Tried to do a little chipping on the wings and body too, and I gave it my best to weather up the trolley.
Anyway, another one off the bench! A week left to finish up the Alf!
I learned the hard way that bare metal foil is terrible if you mask a canopy and then leave it for a couple years!! Also noticed that I forgot to paint the instrument panel cowl black..... :angry:
Tried to do a little chipping on the wings and body too, and I gave it my best to weather up the trolley.
Anyway, another one off the bench! A week left to finish up the Alf!
phantom II
Master at Arms
Darn, Warren ! You can be proud of this one .
Even the trolley came out really nice .
Cheers, Christian B)
Even the trolley came out really nice
.Cheers, Christian B)
ij001
Well-known member
Darn, Warren ! You can be proud of this one .
Agree 100%
Ian.
