centaur567
Well-known member
This is the very old Monogram/ Revell kit. Thought I'd build it and have it flying over the KV-1. Gary S. XLV MMXX
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Ju-87 Stuka
- Thread starter centaur567
- Start date
This is the very old Monogram/ Revell kit. Thought I'd build it and have it flying over the KV-1. Gary S. XLV MMXX
This should be fun. 
centaur567
Well-known member
1/48th Gary S. XLV MMXX
centaur567
Well-known member
No, I'll just bore them out. Mostly OOB. Gary S. XLV MMXX
.
centaur567
Well-known member
OK. Now I've done it. I changed the location of the floor periscope. Next are throttle and mixture quadrants. Need to find location and shape of window on aircraft belly. Also added a disk to the propeller shaft so that I won't have to install the prop before closing up the fuselage. Gary S. XLV MMXX
centaur567
Well-known member
Haven't been able to find any decent photos of the lower window. This photo just shows a small corner of what looks like an opening just behind the radiator. Gary S. XLV MMXX
centaur567
Well-known member
Yes, that helps a lot. I guess there was a glass cover on it. I wonder, was the X bracing on the cradle used as cross hairs? Gary S. XLV MMXX
Heavens Eagle
Well-known member
I was building a Ju87A variant. (Horribly incorrect Trumpeter kit) I will look around and try to find some info on the window.
Heavens Eagle
Well-known member
There are a lot of things that were updated in the Stuka, but if you think about it, the base structure should be relatively unchanged. I knew I had something on the window.
