Heavens Eagle
Well-known member
So far so good Greg. 
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Baby- AMT's Supernatural 1967 Chevy Impala
- Thread starter Greg Kimsey
- Start date
Wow! 
Greg Kimsey
Well-known member
I am closing in on closing in the door jamb! Little by little. I am thinking epoxy putty and shaping for the final steps.
The overlap of the door will keep it from going to far in. Excellent work Greg!
Greg Kimsey
Well-known member
Gotta admit I have been doing almost 100% 3D modeling of the Scout lately. Very little time at the model table. What I HAVE done has been good though. I have the door posts in. I ended up plastic cementing with Testors cement then reinforcing with JB Weld black. They "seem quite sturdy. I have sone shaping yet to do on the JB.
I have had to figure out how to fill the side walls so I can hinge the front doors. I taped the windshield in then used museum putty to hold the dash while I pondered. I ended up cutting the side plates off of the dash and removing the register tabs. I used the plates as a template to make new ones and some filler layers with styrene.
I used paper card to make a template for the shape of the car body I needed to fill then cut styrene to match and glued it all together. There is smoothing and shaping left to be done but it fits well
I have an idea for the hinges on the front door. The rear doors is still a puzzler. More to come!
I have had to figure out how to fill the side walls so I can hinge the front doors. I taped the windshield in then used museum putty to hold the dash while I pondered. I ended up cutting the side plates off of the dash and removing the register tabs. I used the plates as a template to make new ones and some filler layers with styrene.
I used paper card to make a template for the shape of the car body I needed to fill then cut styrene to match and glued it all together. There is smoothing and shaping left to be done but it fits well
I have an idea for the hinges on the front door. The rear doors is still a puzzler. More to come!
Greg Kimsey
Well-known member
You call it something else I am sure. UHU putty? Sticky putty? Museum's use it and we used it in our Antique mall to keep lids on pottery and glass jars and they call it museum putty.
Rhino
Super Moderator
It fun to watch another guy that sees "what could be" with his models, unsatisfied by "what is"!
Right about here, my TLAR brain goes "Are you really gonna cut, sand and shape all that to make just the one? Car model guys would go NUTS, "NVTS, nuts" over stuff like this! It could be adapted to station wagons and other 4-door automotive kits! Mold and cast? LPP is much easier to sand and shape, or if you had a good 3D scanner you could alter the CAD design by vehicle dimensions, print these and then......"
Stop hittin' me with that shillelagh, Greg.
I'll try to stay in my own Wheelhouse, never mind.
Right about here, my TLAR brain goes "Are you really gonna cut, sand and shape all that to make just the one? Car model guys would go NUTS, "NVTS, nuts" over stuff like this! It could be adapted to station wagons and other 4-door automotive kits! Mold and cast? LPP is much easier to sand and shape, or if you had a good 3D scanner you could alter the CAD design by vehicle dimensions, print these and then......"
Stop hittin' me with that shillelagh, Greg.
I'll try to stay in my own Wheelhouse, never mind.
Greg Kimsey
Well-known member
I can see a 3D print project coming up LOL. All that stuff you said never occurred to me! I do NOT have a good 3D scanner although my best friend and I were talking about "wouldn't it be great" just yesterday.
Rhino
Super Moderator
Imagine the 1965 Chevelle surf wagon kit with opening doors? '31 Woody wagon? How about an opening driver's door on a vintage Monogram Quicksilver/Streetfighter '60 Chevy sedan delivery model? It already has a flop-front hood. See how this starts to sound like wiping your back-side on a hoop? There's just no end to it!
simpler hinges?
