• Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
    This requires that you manually reset your password.
    Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.

1/12 Harley **DONE**

1/12 Harley (WIP)

Hippy Ed said:
Managed to get a few minutes on this this mornin' :D Got the fenders installed, now, I'll tryand get pics later on as I gotta take mom into town...
Click to expand...

excuses excuses when you going to get to work and quit making excuses .... :bat :bat :bat
 
1/12 Harley (WIP)

Hippy Ed said:
Swordsman said:
Hippy Ed said:
Managed to get a few minutes on this this mornin' :D Got the fenders installed, now, I'll tryand get pics later on as I gotta take mom into town...
Click to expand...

excuses excuses when you going to get to work and quit making excuses .... :bat :bat :bat
Click to expand...

Aint an excuse Gerry! It's a fact o life... :eek:ldguy :drinks Just got back a few mins ago
Click to expand...

Only 5 o'clock out there in the land of fruits, flakes and nuts .... Get to cracking .... Unless that what you have in your pipe ... :fencing :yipee :rotf :rotf :rotf :rotf :bat :bat
 
1/12 Harley (WIP)

h8453277.JPG


h0f3771b.JPG


h3605ddc.JPG
 
1/12 Harley (WIP)

well that's pretty good old sport not a bad looking bike ... (y) ... I'll be watching to see when you finish it .... :popcorn ... Really didn't you had time to get this far .... :ro: :dude
 
1/12 Harley (WIP)

Swordsman said:
well that's pretty good old sport not a bad looking bike ... (y) ... I'll be watching to see when you finish it .... :popcorn ... Really didn't you had time to get this far .... :ro: :dude
Click to expand...
Thanks Gerry :drinks
This build is a fun one & so far, nothing really hard nor time consuming with it. Although, there's a hose that comes with it for the plug wires, clutch & throttle cables which might be a challenge... :idonno :unsure:
Will try to get more done on it soon.
 
1/12 Harley (WIP)

Well :pinch: :bang head Spent a little time on this this mornin' & realized that Sprue "A" is MIA!! :eek:hmy: :blink :frantic I have spent a good portion of the am to look fer it & have yet to find it :gogo Had painted a few parts on it night before last, set it aside to dry on the bench against it's box with paint jars supporting it...

Ok, note to self: When grand-monkey comes to visit, make sure things are outta reach!!
 
1/12 Harley (WIP)

Missing sprue tree has been found!! :dance :dance :dance :woohoo: B) Seems my grand-monkey had slipped it inside the 1/48 SNJ box :huh: Yeah, I just noticed the box wasn't closed very good/right. So, I lifted the boxtop & there it was!! LoL... He's a smart arse & he's just 18 months old!! :eek:hyeah :drinks
 
1/12 Harley (WIP)

REVELL done screwed da pooch on dis one!! :lol: :eek:hyeah


h1bc6ac4.JPG

Instructions...
and the parts...
h25bbfc9.JPG


h0d2ae72.JPG


h7f502e9.JPG

What y'all think? Suggestions... :idonno :frantic
And no Gerry, I can't go there... :evil: 's still got a restraining order out on me :bang head
 
1/12 Harley (WIP)

Not sure the problem. The tail of the T on the license plate holder doesn't fit the lower slot?
 
1/12 Harley (WIP)

Hippy Ed said:
REVELL done screwed da pooch on dis one!! :lol: :eek:hyeah

Instructions...
and the parts...

What y'all think? Suggestions... :idonno :frantic
And no Gerry, I can't go there... :evil: 's still got a restraining order out on me :bang head
Click to expand...

What chew talking bout Willis .... ???
 
1/12 Harley (WIP)

moon puppy said:
Not sure the problem. The tail of the T on the license plate holder doesn't fit the lower slot?
Click to expand...

You got it MP! The upper slot for the taillight is ok altho a bit big. & the lower square is too small for the license plate frame!! IF I put the frame on the taillight slot, it wont sit right nor look right
 
1/12 Harley (WIP)

Swordsman said:
Hippy Ed said:
Swordsman said:
Hippy Ed said:
REVELL done screwed da pooch on dis one!! :lol: :eek:hyeah

Instructions...
and the parts...

What y'all think? Suggestions... :idonno :frantic
And no Gerry, I can't go there... :evil: 's still got a restraining order out on me :bang head
Click to expand...

What chew talking bout Willis .... ???
Click to expand...

:idonno :eek:ldguy :idonno
Click to expand...

Well I can't read you mind ... :idonno
Click to expand...


It seems dat it went over yer head like a 747 :smack :lol:
 
1/12 Harley (WIP)

Hippy Ed said:
Swordsman said:
Hippy Ed said:
Swordsman said:
Hippy Ed said:
REVELL done screwed da pooch on dis one!! :lol: :eek:hyeah

Instructions...
and the parts...

What y'all think? Suggestions... :idonno :frantic
And no Gerry, I can't go there... :evil: 's still got a restraining order out on me :bang head
Click to expand...

What chew talking bout Willis .... ???
Click to expand...

:idonno :eek:ldguy :idonno
Click to expand...

Well I can't read you mind ... :idonno
Click to expand...


It seems dat it went over yer head like a 747 :smack :lol:
Click to expand...

Well there wasn't e en a tail wind ... Stuck in 'ol Lodi once again ... :eek:hmy: :eek:hyeah :drunk
 
1/12 Harley (WIP)

Hippy Ed said:
moon puppy said:
Not sure the problem. The tail of the T on the license plate holder doesn't fit the lower slot?
Click to expand...

You got it MP! The upper slot for the taillight is ok altho a bit big. & the lower square is too small for the license plate frame!! IF I put the frame on the taillight slot, it wont sit right nor look right
Click to expand...

Got home about 5:30pm from my cousin's place & I'm still hurtin' :bang head Haad fun tho!! :D Hadn't been there for more than 5 mins & cousin Jerry broke out his .44 Mag & we walked down the hill & fired it off for a bit!! I had a hard time getting back up his steep drive way as my back started hurtin' real bad. He has several Harleys & also both his sons had their bikes there too so, I got to checking them out. Shoulda got the camera out of the truck but, wasn't thinkin' :facepalm
So, when I got home, I got to lookin' this problem over & think I may have a solution... I'll just break out the Dremmel with a cutter on it & notch the fender to accept the license plate frame... :hmmm
 
1/12 Harley (WIP)

Sorry about the delay in updating this... Seems I just found out that we have 2 different phone service providers CalTel (local & Something Century??? for long distance.) and mom forgot to paythe long distance carrier and they cut us off internet &phone! :blink :eek:hmy: :angry: :bat :bat :bat SHe called them, made a payment over the phone on the 8th yet, nothing happened so, she called them again & got a run-a-round for 2 days. I told her to call CalTel and get things straightened out & let them be our long distance carrier & let Century go piss up a rope.
Well, today we got back online & so I can now update this thread & others :drinks :dance

ha8e2439.JPG


h305f89e.JPG


h93ded40.JPG

Decals done :D

h19a95b1.JPG

taillight

h0cb661d.JPG


h74f6866.JPG

taillight & license plate done & atached
h74d3f0e.JPG


hb57f5d0.JPG


hfad7599.JPG

nearing the finish line :drool
 
You must log in or register to reply here.

Similar threads

Panzerwrecker
Building a 1/35 Sd.Kfz. 7 mittlerer Zugkraftwagen 8 ton
2 3
Replies
50
Views
3K
moon puppy
moon puppy
paddy
Italeri Alfa Romeo roadster 8c 2300 1/12
3 4 5
Replies
84
Views
10K
jknaus
jknaus
jeaton01
Revell P-51D-5
2
Replies
31
Views
2K
moon puppy
moon puppy
Brokeneagle
PART 5C U-516 9C 1945 - 1/72 SCALE (Revell 05113)
Replies
4
Views
665
Brokeneagle
Brokeneagle
paddy
Your forum needs you !!
2
Replies
20
Views
2K
Steve Ski
Steve Ski
Back
Top