Wreaking Havoc 1: A-20B 41-3266(?) Outhouse Mouse with a Sharkmouth

[Heavens Eagle]

I just finished watching a U-Tube video on the guy who created the B-25 Gunship /strafer while flying Havocs out of Darwin. Really interesting, as he initially loaded up his Havoc with 50 cal,s, as the .30 couldn't penetrate the armour on the Jap ship hulls. The 50's made the Havoc nose heavy and really hard to fly. The range was not very good either, so he switched to the B-25's. They had recieved C's and D's but operated better as a long range strafer at low level than the Havoc. Later they moved to the G, then the H and finally J's as a full production variant....which is the 1/32 kit I just bought.

Sorry saul - a bit of a side journey.

Be aware that the HK B-25 engines are rather "NOT RIGHT" For my kit I found that HPH put out some engines years ago and obtained a couple to do the engines up correctly. Unfortunately HPH stuff is not available any longer.
The B-25 used Wright R-2600 engines. The engines were also used on the TBM Avenger, and the SB2C Helldiver. Not sure if anyone is doing an aftermarket or good 3D print of the R-2600, but just be aware.

 

[Sharkmouth]

Not sure if anyone is doing an aftermarket or good 3D print of the R-2600, but just be aware.

 

[Heavens Eagle]

View attachment 186216

That looks like a LOT BETTER solution than the engine kits HPH produced, except that the tops of the cylinders are chopped off.
That is fine if you don't know how to modify the cowling, but bad if you want the engine to be exposed.

 

[Steve Ski]

That's pretty detailed, excellent.

 

[Sharkmouth]

if you want the engine to be exposed.

Say no more, they make that too... Click for the super-detailed complete engine.

 

[Heavens Eagle]

Verra, verra, verra NICE!