-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Sherman in 1/16 scale.
- Thread starter Tim A.
- Start date
Heavens Eagle
Well-known member
Does the spring work?
Looks like it would work for real.
Tim A.
Well-known member
It does not. Theres a styrene rod inside that's connected the top to the bottom.
Tim A.
Well-known member
Thanks! I'm so confused
centaur567
Well-known member
Nice attention to detail. Gary S.
Heavens Eagle
Well-known member
I figured as much. Was mostly just joking.
It is looking really good Tim! Making me ponder the new Gecko models 1/16th Chaffee that Andy now has in stock.
Tim A.
Well-known member
I used some sterling silver wire because it's what I had that was the right diameter, not springy.I figured as much. Was mostly just joking.
Don't know who does a German 88 in 1/16, but I'm wanting to do one.
Tim A.
Well-known member
Thanks Gary!
Tim A.
Well-known member
All stop on the build.
I'm dead set on displaying both machine guns loaded. I think I can deal with showing the printed 30 cal this way and I'm trying to "fix it up generally by adding details like the swivel lock to the pedestal. However the kit's 50 cal has problems. The gun itself is good enough for me, but the ammo box is not intended to be shown open. Plus the ammo box and it's cradle is molded as one piece. It just looks clunky. If Takom failed it was here. Now, I'm starting to look for solutions in the 3d print world.
Peddinghaus, through Dragon has the complete gun for 35 bucks shipped. Can't tell how good it is other than the photo of it and I'm getting tired of being burned by low quality offerings in this scale.
AVF club has the 50 cal 3d print that I know is top quality for around 30 usd. But, They're in Europe.
I'm dead set on displaying both machine guns loaded. I think I can deal with showing the printed 30 cal this way and I'm trying to "fix it up generally by adding details like the swivel lock to the pedestal. However the kit's 50 cal has problems. The gun itself is good enough for me, but the ammo box is not intended to be shown open. Plus the ammo box and it's cradle is molded as one piece. It just looks clunky. If Takom failed it was here. Now, I'm starting to look for solutions in the 3d print world.
Peddinghaus, through Dragon has the complete gun for 35 bucks shipped. Can't tell how good it is other than the photo of it and I'm getting tired of being burned by low quality offerings in this scale.
AVF club has the 50 cal 3d print that I know is top quality for around 30 usd. But, They're in Europe.
Last edited:
An ammo box in this scale should look a lot better than just scaled up from 1:35. Good luck Tim.
KLOTZEN
Active member
[1/16] MM970 M2 cal.50 Machine Gun for M3/M3A1
m.solmodel.com
And because I know you won’t be able to live without it.
[1/16] MM971 M1919A4 Cal.30 Machine Gun for M3A1 (3set)
m.solmodel.com
Heavens Eagle
Well-known member
Thanks for those links Dave! The ones for the M3 will probably be used by me once I start up on my 1/16th M3. Also Andy has been adding more and more aftermarket 1/16th stuff as well as kits. Between Das Werk, Andy, Takom, and a couple of others that are offering 1/16th kits for reasonable prices (for the size and complexity) This scale has become much more interesting. Fun part is I also have several 1/16th scale VW kits. Might have to pull out the panel van next.[1/16] MM970 M2 cal.50 Machine Gun for M3/M3A1
And because I know you won’t be able to live without it.
[1/16] MM971 M1919A4 Cal.30 Machine Gun for M3A1 (3set)
KLOTZEN
Active member
I suppose I could answer the Peddinghaus question too. I have one set of printed 1/35 heads and several sets of decals from their newer range of items. Super thick carrier film on the decals, the heads all have print lines and a lot of them. I don’t think there is any scenario that would make them useable. The old Peddinghaus stuff was good in that it covered some unobtainium but was not much different than other aftermarket product. I’m inclined to be very caution of any print product that only uses the elevation graphic to advertise. I want to see the actual printed item and I want it up close. I learned this, not too painfully, with MIG printed items, specifically the 1/35 M1919. Full of print lines and droops.
Gaspatch and Master-model both make my preferred MG's and they both have some things in 1/16th but nothing that would help this situation. too bad because if they did they would be perfect.
Gaspatch and Master-model both make my preferred MG's and they both have some things in 1/16th but nothing that would help this situation. too bad because if they did they would be perfect.
Last edited:
Tim A.
Well-known member
Thanks Klotzen. I suspected the Peddinghaus offerings might not be as advertised.
It looks like Sol or AVF will be the fix.
I keep thinking I can fix the 30 cal print I got, but nah. So, your right. Ordering two new guns.
Tim A.
Well-known member
Paul, checkout STEEL POT STUDIOS.
I did a test order of ammo box crates from him for the Sherman build. Excellent prints! So I've placed a larger order that's on it's way. He has many things for the 1/16 M3.
