Well friends after several days painting the stalemate, adding things at the bottom and now I have used other resin to fill the tub.
I worked in shades of water XF 11, XF 51, XF 49 is not treated fairly uniform color if you have some veins and areas of green and brown tones respectively. The product has recently 2 hours of drying and it is pretty strong that the subject is highly reflective and I hope you will appreciate as soon mencionado.Como've added some items because the space was almost as much water as the land and I wanted to take a little. Photos are good.
That sector of the bike I have added items (a bottle, drum, and a motorcycle jacket floating x there to do well loaded and contrast with the opposite corner where there is only a barrel almost in the bridge and the opposite corner that has only a piece of floating table.)
I put the drowned man in that position based on what follows. I thought it was going to direct more attention to the figure on the edge of the bridge if you put it facing the other side. Basically my idea was to create a sort of line that would link 3 elements: the bike, the position of spitting and the body represented the red x in the sample, and also create a triangle between the table, the spitting and the body represented by the black line.
Other side.
6 hours later ....
Well friends it's amazing how fast the product dried over high heat in these parts yesterday. At night I decided to cut the area x product and pour over the entire base. I've used in my estimation, 95% of it. The industry drowning now seems far more credible and able to work after the waves.
Here is a before and after if you look back you can see in the more bricks the level is up (about 2 mm calculation).
Another generals views
This is quite noticeable as the level also increased
360º
Well now let a couple of days and then begin to work with wavelets.
Greetings and thanks for passing.