More JUNKING around .

[phantom II]

The antenna looks great!...you did it very well

Luiz.

Thanks Mike , James , Bob , Ian and luiz .

Luiz , the superglue sands and polishes just as good as the plastic , if you don't give it the full time to cure

Cheers, C . B)

 

[Skinny_Mike]

Looking good Christian. I think you have that wingtip issue fixed.

 

[Rhino]

 

[razordws]

Following with interest Christian!

 

[sharkman]

coming along nicely Chris!

 

[Sharkmouth]

I just realized I still have a Dragon Ju-88C6 so a lot of this will be useful in the future.

I use mostly WeldOn3 which is for gluing clear acrylic together without crazing the acrylic.

This is one I also use and bought on Amazon.

Made a small hole in the metal seal top and used a long needle glass syringe to pull it out and put it in an old Ambroid bottle. Then kept it "tightly" capped.

That is a great tip!

Regards,

 

[Heavens Eagle]

The old can lasted over 10 years as I bought it while still living in Tulsa. The trick is keeping it tightly sealed.

Also WeldOn3 works on Styrene just like Tenax and Ambroid Pro Weld. It also works on ABS to bond ABS to itself. I have bonded Styrene to ABS with it, (Styrene surface detail) It stays in place quite well though it can be popped off if you work at it a little.

 

[phantom II]

Need to try that. Thanks for the tip.

Cheers, Christian

 

[phantom II]

Sorry for the long delay . I broke the front seat several times trying to fix the belts.

Finally found a chap that makes them but he had to wait for his knee surgery to heal before doing anything .

Hopefully he is now working on the order .

I bought several since I have more birds that will need one.

Cheers, Christian B)

 

[Iron Mike]

Dontcha just hate waiting for parts? :frantic

 

[moon puppy]

Speaking of that, I got tracks due...

 

[phantom II]

Dontcha just hate waiting for parts? :frantic

Even worse when you find the only helpful guy laid up due to surgery :frantic
Hopefully, he'll get around to making some soon but then, there's the floating all the way from the UK. It'll be a bit longer.

Cheers, C. B)

 

[Piet]

 

[sharkman]

looks like a nice casting!

 

[phantom II]

looks like a nice casting!

It does look good . Can't wait to get it painted up.

The Hasegawa version needed too much Dremel work . It was just very fragile when I installed the shoulder harness .

Cheers, Christian B)