Duke Maddog
Well-known member
Remarkable work on those propellers. Most impressive!
-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
Antonov An-26
- Thread starter uros
- Start date
uros
Active member
Thanks everyone!
A bit more done and a bit closer to the finish. All frame s were lost when I was polishing the windshield so I marked them with thin strips of masking tape. There is also a strange fogging, but luckily this will be covered with paint.
Then I put a piece of tape over it, traced it an cut out.
All other transparencies were masked to, followed by another layer of primer and a round of sanding.
Kits wheels looked bad too so I made new rims out of punched out discs.
I added brake lines to the main landing gear using led and copper wire.
At this point I was fed up with rescribing, so I took a shortcut and made some panels with aluminium tape.
And this is all detailing I'm willing to make on this model. Another round of primer follows then it's off to painting.
Thank you for looking in!
A bit more done and a bit closer to the finish. All frame s were lost when I was polishing the windshield so I marked them with thin strips of masking tape. There is also a strange fogging, but luckily this will be covered with paint.
Then I put a piece of tape over it, traced it an cut out.
All other transparencies were masked to, followed by another layer of primer and a round of sanding.
Kits wheels looked bad too so I made new rims out of punched out discs.
I added brake lines to the main landing gear using led and copper wire.
At this point I was fed up with rescribing, so I took a shortcut and made some panels with aluminium tape.
And this is all detailing I'm willing to make on this model. Another round of primer follows then it's off to painting.
Thank you for looking in!
phantom II
Master at Arms
Looking good 
and you make it look so easy.
Cheers, Christian B)
and you make it look so easy.Cheers, Christian B)
Adam Baker
Active member
The Expendables!!
Impressive work so far!
Impressive work so far!
Which markings? Need suggestions? not that my choice would be a surprise...
Regards,
uros
Active member
The Expendables!!
Impressive work so far!
Thank you! I didn't know this was in a movie!
This one is now painted. It took a lot of masking, but it was worth it!
And finished! :yipee
This wasn't the best kit and I was really rushing it, but I like how it came out.
Thank you for looking in!
phantom II
Master at Arms
I'm liking it 
Cheers, Christian B)
Cheers, Christian B)
and a very nice finish it is! 
REally dig the antenna work, all around great job
REally dig the antenna work, all around great job
Duke Maddog
Well-known member
Wow! Sensational work! One would never know how difficult a build this was with your skillful completion!
