-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
AFV Club M5A1 Stuart Early Production
- Thread starter Tony lee
- Start date
The result of no sleep! 
Almost done but blurry photos from lack of sleep. :P
Any pointers as to what needs attention?
Regards,
Almost done but blurry photos from lack of sleep. :P
Any pointers as to what needs attention?
Regards,
Skinny_Mike
Well-known member
And the production line keep saying chugging along!
Nice work Tony!
Nice work Tony!
"Any pointers as to what needs attention?" Saul ask.
Just make sure that slab sided lower hull is square,other than that it's not the best but yet it's not bad. The gun is complete but leaves a lot to be desired.
I guess I shook the camera a little when I snapped the shot.
Now I need the M5A1 late #35161,it seems all the USA venders are sold out.
Tony leeldguy
Just make sure that slab sided lower hull is square,other than that it's not the best but yet it's not bad. The gun is complete but leaves a lot to be desired.
I guess I shook the camera a little when I snapped the shot.
Now I need the M5A1 late #35161,it seems all the USA venders are sold out.
Tony lee
ldguy
Now I need the M5A1 late #35161,it seems all the USA venders are sold out.
Now we see the great work!
The vendors on eBay are out of the question with the unfortunately high shipping prices.
I checked my stash and I have the kit. Check your PM.
Regards,
I gotta keep your momentum going!
Regards,
Regards,
Update
More detail added:
The 30cals are pretty simple,the barrels are not drilled out but do have a dimple that makes the drilling in the center easier.
The grousers for the turret sides are a two piece affair and you have to install one end plate which is very very small so make provisions to catch these and not feed the carpet monster.
Dressing up the aft section is next.
Uncle Tonyldguy
More detail added:
The 30cals are pretty simple,the barrels are not drilled out but do have a dimple that makes the drilling in the center easier.
The grousers for the turret sides are a two piece affair and you have to install one end plate which is very very small so make provisions to catch these and not feed the carpet monster.
Dressing up the aft section is next.
Uncle Tony
ldguy
Skinny_Mike
Well-known member
Beautiful work sir!
Brokeneagle
Master at Arms
B) Nice Tony. Thanks for the comparison. I have never seen these versions side by side - I definately like the later versions shape much better.
Ian
Ian
