-
Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
This requires that you manually reset your password.
Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.
These Go To Eleven TASK COMPLETE!
- Thread starter Iron Mike
- Start date
phantom II
Master at Arms
These Go To Eleven
Cheers, Christian B)
Cheers, Christian B)
phantom II
Master at Arms
These Go To Eleven
If you had a Sansui, that's a memory in itself :coolio
Cheers, Christian B)
I was once listening to Johnnie's brother perform Frankenstein on the Sansui ... when the praying Hands My Mom had jumped on the floor ... That little diddy brought back lots of Memories ...
If you had a Sansui, that's a memory in itself :coolio
Cheers, Christian B)
Iron Mike
Master At Arms And Resident Curmudgeon
These Go To Eleven
Youse mugs is slippin', I break out a Young Frankenstein and nobody jumps in.hmy: Where wolf? :idonno
OK, so we're still massaging the Italian job. AMT made both these kits with floor pans that result in horizontal body seams that would be quite noticeable after assembly. Not an option, you just can't make them look right and the fit of the old tooling is lousy. This is a recent reproduction kit, so couple the fit issues with the new soft plastic they are made from, sanding, grinding and cutting are a challenge. The plastic kind of rolls up and you have to use an X-Acto to clean the edge. It's the damnedest thing. :idonno Here's where we are currently.
Virgin floor pan:
Whack the outside edges off:
See that nasty burr? :pinch:
Glue the outside edges to the upper body, get out the filler. :facepalm
Fit on one side was pretty good, but their symmetry was off, as the other side has a big gap and the shape is wrong SO, I filed it down to get it close and decided to add a half round bead along the seam to hide the gap and do away with the filler so close to the door gap.
I used tape to get the bead straight, then "welded it in place with Tamiya Extra Thin Cement.
I know it wasn't part of the original body, but it serves the purpose and should be subtle enough not to be obvious. More later.
:drinks
Youse mugs is slippin', I break out a Young Frankenstein and nobody jumps in.
hmy: Where wolf? :idonno OK, so we're still massaging the Italian job. AMT made both these kits with floor pans that result in horizontal body seams that would be quite noticeable after assembly. Not an option, you just can't make them look right and the fit of the old tooling is lousy. This is a recent reproduction kit, so couple the fit issues with the new soft plastic they are made from, sanding, grinding and cutting are a challenge. The plastic kind of rolls up and you have to use an X-Acto to clean the edge. It's the damnedest thing. :idonno Here's where we are currently.
Virgin floor pan:
Whack the outside edges off:
See that nasty burr? :pinch:
Glue the outside edges to the upper body, get out the filler. :facepalm
Fit on one side was pretty good, but their symmetry was off, as the other side has a big gap and the shape is wrong SO, I filed it down to get it close and decided to add a half round bead along the seam to hide the gap and do away with the filler so close to the door gap.
I used tape to get the bead straight, then "welded it in place with Tamiya Extra Thin Cement.
I know it wasn't part of the original body, but it serves the purpose and should be subtle enough not to be obvious. More later.
:drinks
Swordsman
Active member
These Go To Eleven
I still have the Sansui ... One of the Best Home systems from the Eighties ... I really think they go 12 ...
I was once listening to Johnnie's brother perform Frankenstein on the Sansui ... when the praying Hands My Mom had jumped on the floor ... That little diddy brought back lots of Memories ...
If you had a Sansui, that's a memory in itself :coolio
Cheers, Christian B)
I still have the Sansui ... One of the Best Home systems from the Eighties ... I really think they go 12 ...
Swordsman
Active member
These Go To Eleven
Looking very good Mike ... nice Mod on the coupe body ... I didn't Hear Young fronkistein ... but I'm digging your taste in Music ... When I went into the Force I took a John Nitzinger & a ZZ Top albums with Me ... The guys laughed at ZZ top ... Nitzinger never made it but still Louisiana Cock Fight is a great song ... Those little 'ol Bands from Texas Rock ... 
:dude
Looking very good Mike ... nice Mod on the coupe body ... I didn't Hear Young fronkistein ... but I'm digging your taste in Music ... When I went into the Force I took a John Nitzinger & a ZZ Top albums with Me ... The guys laughed at ZZ top ... Nitzinger never made it but still Louisiana Cock Fight is a great song ... Those little 'ol Bands from Texas Rock ...
:dude 
These Go To Eleven
Nice solution. If that trim is not part of the original you should be able to sand it down and it'll fill the gap nicely.
Nice solution. If that trim is not part of the original you should be able to sand it down and it'll fill the gap nicely.
phantom II
Master at Arms
These Go To Eleven
Good save Mike. I don't think this kit was good even when I was a teenager . Not doubt, not any better now days.
I did not have enough skills to build it back then.
Cheers, Christian B)
Good save Mike. I don't think this kit was good even when I was a teenager . Not doubt, not any better now days.
I did not have enough skills to build it back then.
Cheers, Christian B)
reconron
Active member
These Go To Eleven
Word!
Gr,Ron.
See, this is the cool thing about building cars, you can add stuff like this and no one can b!tch about it.
Word!
Gr,Ron.
Sherman 18
Master at Arms
These Go To Eleven
Nice work Mike!
Nice work Mike!
Iron Mike
Master At Arms And Resident Curmudgeon
These Go To Eleven
Many thanks, my friends! You may be asking yourself when will this build kick in? Well, here's what's making this rail go to 11. A vintage Allison V-12! I've accumulated several over the years, you may remember seeing these in the hobby shops.
They came molded in chrome, which HAD to go, so I soaked the parts in Super Clean for a couple days.
Stuffing the fat man into this bath tub required mock up, mock up and more mock up. I made motor mounts from scale 2 x 4 square styrene and "welded" them to the chassis.
Checking the fit with the body shell.
Now THIS is a valve cover! Coated it with Tamiya gray primer. This is the unbuffed Humbrol.
Then shot them with Humbrol Metalcote 27003 and buffed with a Q-Tip.
Here's a shot before and after buffing.
The chassis wears a coat of Tamiya Light Gunmetal.
That's all for now, much more to come.
Crank it up!
https://www.youtube.com/watch?v=kb-yB4OxGBA
:drinks
Many thanks, my friends! You may be asking yourself when will this build kick in? Well, here's what's making this rail go to 11. A vintage Allison V-12! I've accumulated several over the years, you may remember seeing these in the hobby shops.
They came molded in chrome, which HAD to go, so I soaked the parts in Super Clean for a couple days.
Stuffing the fat man into this bath tub required mock up, mock up and more mock up. I made motor mounts from scale 2 x 4 square styrene and "welded" them to the chassis.
Checking the fit with the body shell.
Now THIS is a valve cover! Coated it with Tamiya gray primer. This is the unbuffed Humbrol.
Then shot them with Humbrol Metalcote 27003 and buffed with a Q-Tip.
Here's a shot before and after buffing.
The chassis wears a coat of Tamiya Light Gunmetal.
That's all for now, much more to come.
Crank it up!
https://www.youtube.com/watch?v=kb-yB4OxGBA
:drinks
These Go To Eleven
I gotts some FEATS! Juanita!!!
Looks great Mike.
Juanita has that effect on folks..
https://www.youtube.com/watch?v=0yHuv0tufcE
I gotts some FEATS! Juanita!!!
Looks great Mike.
Juanita has that effect on folks..
https://www.youtube.com/watch?v=0yHuv0tufcE
