• Modelers Alliance has updated the forum software on our website. We have migrated all post, content and user accounts but we could not migrate the passwords.
    This requires that you manually reset your password.
    Please click here, http://modelersalliance.org/forums/login to go to logon page and use the "Forgot your Password" option.

Meng Merkava w/cope cage

OK so here is where it currently sits. I really should have backed off and bought fruils but I’m committed. They aren’t beef ext but they are useable. Bottom run only as she’ll have the side armor attached. I think I may take a stress break and move away from this one for a bit. Not Meng as I remember it
IMG_1564.jpeg
 
So to do this, I built 65 individual links per side, then laboriously cur the pins out, then friction fit them, applied adhesive, shaped and installed them. Not easy. Not how the instructions call for, but I made it work

The Hobbyboss Merkava Mk4 was much easier than this and Meng is downgraded IMHO

For those interested, here is assembled track with the pin, and an assembled track after I cut the pin out, but before final trim. Hope this helps to get an idea of what I done-did

IMG_1577.jpeg
 
Back
Top