Ruben Lopez
Active member
Thanks guys. The muzzle brake wasn't difficult, you only have to be careful not to drill through the other side.
Before I show you the painted model let me show you something that I forgot the last time; the engine deck with the Pe grilles.
		
		
	
	
		 
	
Now we can proceed. Here are the major components painted. I used Polly S German Yellow over red primer from a can.
		 
	
Next I painted the tracks. For these I used a gunmetal color from Plaid (Ceramic paint) followed by a rust wash. For where the road wheels make contact with the tracks I used Tamiya Metallic Grey. The interior of the engine hatch was painted with Tamiya Hull Red.
		 
	
The other side.
		 
	
The exhausts received a light wash of rust.
		 
	
The fans were painted with Metallic Grey
		 
	
And here are all the components reunited. I had to make some shims to elevate the turret because it sits too low on the chassis.
		 
	
		 
	
Next, decals and washes.
				
			Before I show you the painted model let me show you something that I forgot the last time; the engine deck with the Pe grilles.
 
	Now we can proceed. Here are the major components painted. I used Polly S German Yellow over red primer from a can.
 
	Next I painted the tracks. For these I used a gunmetal color from Plaid (Ceramic paint) followed by a rust wash. For where the road wheels make contact with the tracks I used Tamiya Metallic Grey. The interior of the engine hatch was painted with Tamiya Hull Red.
 
	The other side.
 
	The exhausts received a light wash of rust.
 
	The fans were painted with Metallic Grey
 
	And here are all the components reunited. I had to make some shims to elevate the turret because it sits too low on the chassis.
 
	 
	Next, decals and washes.
 
				 
	 
 
		 
 
		
 
	 
	 
	 
	 
	 
	 
	 
	 
	 
	 
	 
	 
	 
	 
 
		 
 
		 
 
		
 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		