/gallery/albums/userpics/10065/20001.jpg
Old package on left, new one on right, same price!
------------------------------------
/gallery/albums/userpics/10065/20001a.jpg
Contents of the set, unchanged as well.
Details of the set:
/gallery/albums/userpics/10065/20001b.jpg
/gallery/albums/userpics/10065/20001c.jpg
Light flash to remove.
/gallery/albums/userpics/10065/20001d.jpg
/gallery/albums/userpics/10065/20001e.jpg
/gallery/albums/userpics/10065/20001f.jpg
Wood grain is visible! OK, perhaps it is hard to see in the photo but it is there!
/gallery/albums/userpics/10065/25202.jpg
This item simply slips over the Tamiya M4 kit's drive shafts replacing the kit parts.
/gallery/albums/userpics/10065/25404.jpg
The casting marks are very accurate. To use, see next set where the hull modifications needed for the DML kit are shown.
/gallery/albums/userpics/10065/25404a.jpg
/gallery/albums/userpics/10065/25404b.jpg
/gallery/albums/userpics/10065/25503.jpg
An excellent replacement rear hull wall but be wary that there is some shrinkage and work to be done to the DML hull.
/gallery/albums/userpics/10065/25503a.jpg
The resin is so sensitive to detail it picked up Karl van Sweden's notes on the master!
/gallery/albums/userpics/10065/25503c.jpg
What to remove on the DML kit. I used a razor saw to remove it as I wanted to save the detail for another kit. Grinding it away should only take seconds.
/gallery/albums/userpics/10065/25503d.jpg
Because of the shrinkage, I removed the vertical bars plus carefully filed the inside of the idler mounts as there was some unevenness found.
/gallery/albums/userpics/10065/25503e.jpg
The fit is then good but will require some putty.
/gallery/albums/userpics/10065/25504.jpg
I have some photographs which show that there should be a hole for both tow eyes for the clevis bolt. Casting marks are sadly inaccurate. It should be E8543. I let Tiger Models know and they have corrected it.
/gallery/albums/userpics/10065/25504a.jpg
/gallery/albums/userpics/10065/25504b.jpg
/gallery/albums/userpics/10065/25504c.jpg
What to remove.
/gallery/albums/userpics/10065/25504d.jpg
Good fit is achieved.
Old package on left, new one on right, same price!
------------------------------------
/gallery/albums/userpics/10065/20001a.jpg
Contents of the set, unchanged as well.
Details of the set:
/gallery/albums/userpics/10065/20001b.jpg
/gallery/albums/userpics/10065/20001c.jpg
Light flash to remove.
/gallery/albums/userpics/10065/20001d.jpg
/gallery/albums/userpics/10065/20001e.jpg
/gallery/albums/userpics/10065/20001f.jpg
Wood grain is visible! OK, perhaps it is hard to see in the photo but it is there!
/gallery/albums/userpics/10065/25202.jpg
This item simply slips over the Tamiya M4 kit's drive shafts replacing the kit parts.
/gallery/albums/userpics/10065/25404.jpg
The casting marks are very accurate. To use, see next set where the hull modifications needed for the DML kit are shown.
/gallery/albums/userpics/10065/25404a.jpg
/gallery/albums/userpics/10065/25404b.jpg
/gallery/albums/userpics/10065/25503.jpg
An excellent replacement rear hull wall but be wary that there is some shrinkage and work to be done to the DML hull.
/gallery/albums/userpics/10065/25503a.jpg
The resin is so sensitive to detail it picked up Karl van Sweden's notes on the master!
/gallery/albums/userpics/10065/25503c.jpg
What to remove on the DML kit. I used a razor saw to remove it as I wanted to save the detail for another kit. Grinding it away should only take seconds.
/gallery/albums/userpics/10065/25503d.jpg
Because of the shrinkage, I removed the vertical bars plus carefully filed the inside of the idler mounts as there was some unevenness found.
/gallery/albums/userpics/10065/25503e.jpg
The fit is then good but will require some putty.
/gallery/albums/userpics/10065/25504.jpg
I have some photographs which show that there should be a hole for both tow eyes for the clevis bolt. Casting marks are sadly inaccurate. It should be E8543. I let Tiger Models know and they have corrected it.
/gallery/albums/userpics/10065/25504a.jpg
/gallery/albums/userpics/10065/25504b.jpg
/gallery/albums/userpics/10065/25504c.jpg
What to remove.
/gallery/albums/userpics/10065/25504d.jpg
Good fit is achieved.