Search results

That turned out really nice! The 2 seat Harrier is a neat looking plane.

Welcome Bagge, looking forward to it!

Need some input, Here I have worked on cutting the bottom of the tire to give flatness. It starts at 2.25mm removed, up to 2.75mm. I can go more or less. Also added logos and such.

Looks like something Bubba would cobble together in his backyard.. neat..

Still struggling with this tire tread profile, it has proven more difficult than I thought. But I think Im happy with this one. Maybe once I get more familiar with the way the program works I will revisit it. This is a new mustang tire in current times....did the 1940s version look like...

It is my understanding that the D model mustangs in the ETO did not have the antenna wire. The mustangs in the MTO did. And I'm almost positive that Petie the 2nd did not have an antenna wire. I'm sure others will chime in with their knowledge as well. But I have been guilty of putting wires...

The sheet looks solid..but its old.

PM me your address and I will get it in the mail.

Greg, is this what you need?

When it comes to simulating weight on tires, what do you prefer?

That really is outstanding!

I made some changes, screen, resin, and messed around with the supports. After I printed off the first tire I made I realized it was to tall and wide. So I had to change some dimensions which also meant re doing the tread...the old one step forward and 2 back. I got that done yesterday while...

Quick pic of the test print.. I had 3 printing and only 1 made it..also the lines are getting pretty bad in the prints...looks like more troubleshooting....

Mighty Fine work!

Re did the tread, like it better. Also reworked the holes in the hub. They still are not prefect, but I want to emphasize that I'm still learning the 3D cad software. I have maybe alittle over 1 month using it. There is ALOT to it. I also set the tire back a touch from the hubs to give a tire...

I think most of this is just a problem with the way it print the layers. I'm sure as technology progresses it will get better. The early printers was way obvious. That's one reason I held off until now.

Alot of that has to do with either 2 things. The angle of the object or my VAT screen needs replacing. But for now since I'm not really going for quality I'm just leaving it a simple set up. I've already replaced the VAT screen once, and I think this replacement screen is low quality. I noticed...

Fresh off the overnight print..some people drink coffee to get going..I sniff resin 🤪. I already see some changes I will have to make. But its progress. I printed this test as a whole assembly.

You should see my p51 stash.

Also printed of a test wheel..I've already changed the design on it and have it printing now. Mainly wanted to see if the 2 piece hubs would fit properly and they did.